Lap Former Machine in Textile Sector:
Lap former forms the lap by doubling a limited number of slivers (16 to 32 slivers) previously subject to a drawing passage. The slivers are normally fed to the machine in side by side passing through the roller and stop motion. To produce a compact lap slivers enter the drafting section and then calendared it. Finally lap is wound on to the bobbin.
 |
| Lap former machine used in textile spinning sector |
Lap former is a must needed machine for producing lap in spinning section of textile sector. Lap former machine is used for the preparation of lap. It is used after completing the process of blow room. Each lap former machine contains some features which has mentioned in this article with its necessity in yarn manufacturing technology.
Necessity of Lap Former Machine in Textile Industry:
Lap former machine m/c has needed to complete the following processes:
- To reduce the strains to delicate comber reduce.
- To reduce short fibres.
- To decrease fibre damage.
- To control wastage.
- To parallel and straight of fibre in carded sliver by changing pushing of fibres.
- To reduce chance of good fibres waste.
- To reduce thick and thin places in the sliver.
- Not freely opening of fibre from the sliver.
Features of Lap Former Machine Used in Textile Sector:
Various key features of lap former m/c have pointed out in the below:
- Here, delivery speed stands up to 120 meters per minute.
- It has complete belt drive.
- It has also auto spool changer.
- Batt weight goes up to 80 grams per meter.
- Lap transportation is done here through lap trolley.
- Variable top roller is loaded here.
- It is a 4 over 4 spring loaded drafting system.
- Here, creel is driven positively.
- Integral top roller is released here.
Specifications of Lap Former Machine in Textile:
SL No. | Name of Specifications | Value of Specifications |
01 | Category of product | Spinning |
02 | Category of machine | Lap former |
03 | Name of product | Lap Former Machine |
04 | Origin | India/ China/Others |
05 | Power | 9.7Kw |
06 | Temperature | Normal |
07 | Certification | SGS/Others |
08 | Capacity of production | 1000 Set or Sets per Month |
09 | Width of machine | 1060 mm |
10 | Time of lap formation | 365457 min |
11 | Output | 250 Kg per hour |
12 | Diameter of cotton | 365-457 mm |
13 | Punching diameter | 3.18-5.83 mm |
14 | Cotton roller diameter | 230/10-13 mm |
15 | Diameter of combined beater | 406-900 1000 mm |
16 | Dimensions of machine (L×W×H) | 3745×2710×1520 |
17 | Weight of machine | 4300 Kg |
18 | Description about the machine | The machine is used for the raw cotton of all types or chemical fiber. It is also used for cotton wool |
